PRGR Launch Monitor Instructions

PRGR Launch Monitor Instructions

Using a PRGR launch monitor is easy, as long as you follow the instructions carefully. The PRGR sensor surprised many with its performance, particularly for its price. But it is important to note that these launch monitors are best used in optimal conditions to get more accurate numbers. Otherwise, they may suffer from misreads or simply not show anything at all.

PRGR Launch Monitor Instructions



The HS-130A launch monitor has a compact design and can fit into your pocket or golf bag. This makes it more portable, and you’ll be more likely to use it. It weighs just 4.4 ounces (including the batteries), which is lighter than your cell phone.

The PRGR HS-130A launch monitor is easy to use and provides accurate information about your swing speed and ball speed. It also provides total distance and smash factor estimates. Compared to many other launch monitors, this product is affordable without compromising on quality. The PRGR has been in the industry for over 40 years and uses a sophisticated Doppler radar system with up-to-date algorithms.

The HS-130A is an updated version of the previous model and has been received well by users. The new model does not require any external software, and is portable and inexpensive. It is a good choice for golfers who want to improve their swing speed and carry distance, and don’t want to spend a lot of money.

Setting up the launch monitor is easy. You can place it anywhere between 3.5 and five feet from the ground. Make sure to set it up on a flat surface with minimal bumps. If the launch monitor is hitting a mat, you may need to use a booster to adjust it up a few inches. A flatter lie will allow for more consistent data readouts and less missed shots.


When selecting a launch monitor for your aircraft, you should pay attention to the instructions that come with the device. A launch monitor works with one of two technologies: radar or microwave. Radar-based launch monitors work by bouncing microwaves off a moving object and calculating the distance to the destination. The PRGR HS-130A is a great example of a launch monitor that uses a Doppler radar to measure distance. It measures both total distance and carry distance, as well as smash factor.

PRGR Launch Monitor Instructions
PRGR Launch Monitor Instructions

The HS-130 launch monitor instructions are easy to follow and can be set up at 3.5 to 5 feet in height. It is important to use a relatively flat surface to set it up. If you are using it indoors, you will need metallic stickers to make sure it is accurate at measuring spin. The flatter the lie, the more accurate the data readouts and fewer missed shots.

The PRGR HS-130A launch monitor is easy to use and provides clear information. The display will give you your swing and ball speed, smash factor, and carry distance. In addition, it will give you an estimate of total distance. Despite its small size, it gathers a decent amount of data. The PRGR will log your last 500 shots, and will provide you with a scorecard of your total distance.

READ ALSO : Complete Prgr Launch Monitor User Manual Guide 2022

Related posts

Leave a Reply

Your email address will not be published. Required fields are marked *